Ferangelika
Designs by Fereshteh
Nature-Inspired Jewelry
Fused Glass
Watercolor Mandalas
Whether I'm at the jewelry studio engaging deeply with metal and torches or drawing and painting Mandalas in a meditative state, there's always something I'm passionately working on.
This delicate pendant was made from silver paste directly applied to the dried persimmon top in many layers, then fired in a kiln to burn away everything except fine silver. I added a cast silver ‘mini rose’ in the center and a bail in the back before applying patina to get the unusual colors.
1 3/4” H x 3/4” W
Etched pattern on copper. The edges were saw cut and polished, then the cuff formed, and finally patinated.
1 1/8” wide band x 2 1/4” across with a 1” opening.
Size can be adjusted to form your wrist.
Etched pattern on copper. The edges were saw cut and polished, then the cuff formed, and finally patinated.
1” wide band x 2 1/2” across with a 1 1/2” opening.
Size can be adjusted to form your wrist.
Etched pattern on 19 gauge sterling silver. Then the edges were saw cut, cuff formed, then patinated.
1 1/16” wide band x 2 1/4” across with a 1 1/4” opening.
For smaller sized wrists.
SOLD
This ring was made from an etched lotus pattern cut into a circle, then shaped into a dome and the edges shaped into scallops. I then added the silver ball at the center, attached it to the textured ring shank and finally patinated it.
Top size: 1 1/8” across,1/4” H
Ring size:
This ring was made from a cast flower in silver, then mounted on a textured ring shank and finally patinated in 2 processes; one darker for the band in purples and reds, and one, more golden, for the flower.
Flower: 1” Dia. X 3/8” H
Ring size:
This ring was made from a triple succulent cast in silver, then mounted on a textured adjustable ring shank and finally patinated in 2 processes; one darker for the band in blues, teals, and purples, and one, more golden, for the succulents.
Succulents: 3/8” H x 3/4”L
Ring Size: Adustable
This ring was made from casting a seed-pod flower by applying layers of silver paste, letting it dry between each coat, then firing in kiln. I mounted it on a textured adjustable ring shank and finally added patina in 2 processes; one darker for the band in blues, teals, and purples, and one golden for the pod.
Seed-pod: 3/8” H x 5/8” Dia.
Ring size: adjustable
This ring is made of silver paste directly applied to the dried persimmon top in many layers, then fired in a kiln to burn away everything except fine silver. A long process but beautiful results!
The fine silver persimmon is attached to a sterling silver ring shank, patinated, and a blue fused glass added.
Ring size: Made to order.
Top size: 1.5”-2.5” in diameter. As each one will be made to order, each top size and finish will be unique and different from another
50% deposit required on all custom orders.
This ring is made of silver paste directly applied to the dried persimmon top in many layers, then fired in a kiln to burn away everything except fine silver. A long process but beautiful results!
The fine silver persimmon is attached to a ring shank, patinated, and half-drilled baroque pearl added.
These are made to order to your ring size and everyone will be different as no two tops are alike.
Will be made to order; 50% deposit required.
A simple and elegant ‘mixed-metal’ look. Made of sterling silver band and fine silver ball with 24K gold foil added. Sizes 6 and 8 available; other sizes can be custom made in 3-4 weeks.
My fused glass blue-green cabochon is set in a 4-prong silver setting. The silver disk is hammer textured, slightly domed with a very light patina.
Ring size: (to follow)
These delicate earrings were made by cutting 3 different sizes of circles for each earring, texturing and assembling them, then adding keum-boo and patina to two of the circles.
Each pair’s textures and keum-boo applications are slightly different. photos of available pairs can be provided upon request.
Silver earrings molded in fine silver clay from a segment of found sand dollar. After firing, these detailed beauties were sanded and patina was added to a potion of them, then finished with a fresh-water pearl.
The texture on these earrings came from a carved stone That someone gave me. I took an impression of it and made a mold.
It’d made in fine silver clay and after firing and filing, it has been patinated.
These unusual earrings were made from silver paste directly applied to the dried persimmon top in many layers, then fired in a kiln to burn away everything except fine silver. The ‘petals’ were then soldered to the silver rings and patinated.
1 5/8” H to the top of ear wire, 3/4” W
please note: Since these are individually cast from a different fruit top, the shapes and patina would slightly vary. I’m happy to provide you with photos of available stock.
Mixed metal pair of earrings made up of fine silver clay paper, then texture added, keum-boo applied (24 k gold foil) and patinated. Gunmetal ear-wires. Backside of the earrings are patinated silver.
1” w x 2 1/4” Long to the Top of ear wire
Custom Orders Accepted
Gift Certificates Available
I made this pendant from a silver clay mold which I had made from three ginkgo leaves. After casting and adding the hand-made fused glass to the bezel, I patina in gold tones 1 5/8” W x 1 3/4” H